PowerPC - Trying to understand the rlwinm instruction

[JimmyKazakhstan]

rlwinm r5, r4, 3, 2, 30

r4 = source register ofc

r4's value is rotated to the left by 3 bits, (rotate each bit counter clockwise by the value of 3).

Bit 0 rotated to the left by value of 3 is now Bit 29
Bit 1 is now Bit 30
Bit 2 is now Bit 31
Bit 3 is now Bit 0
Bit 4 is now Bit 1
Bit 5 is now Bit 2
etc etc

Now you have a temporary rotated value
MB is the start of the ANDing mask, while ME is the end

2 is the start, 30 is the end
in binary that is a mask of 0011 1111 1111 1111 1111 1111 1111 1110
so in hex that's 0x3FFFFFFE

You take the temporary rotated value and AND it with 0x3FFFFFFE

w/e final result that is now goes into r5, and voila that's a rlwinm instruction

---

and as seeky mentioned earlier, the ME value can be lower than MB so the AND mask will 'loop' around clockwise
i.e. rlwinm r0, r31, 7, 29, 3 #This in binary is 1111 0000 0000 0000 0000 0000 0000 0111 (0xF0000007)

---

So the rotation is counter clockwise while the AND mask works in a clockwise fashion

I'll be honest.... I still don't get it... I'm sorry...

Can you remake that example but with the source register having the value  0x80000004? I think that would help me understand this a lot better.